General Information; Tools And Materials; Model Identification - Dometic FreshJet 3 Series Installation And Operation Manual

Rooftop Air Conditioner (Air Distribution Box, Electronic Controls)
(hereinafter referred to as the "RV") during or after the
time it is manufactured. The product is comprised of
two main components: the rooftop component and
the internal air distribution box (ADB) component. This
product is only suitable for the intended purpose and
application in accordance with these instructions.
This manual provides information that is necessary
for proper installation and operation of the unit. Poor
installation and/or improper operating or maintenance
will result in unsatisfactory performance and a possible
failure. The manufacturer accepts no liability for damage
in the following cases:
• Incorrect assembly or connection, including excess
voltage
• Incorrect maintenance or use of spare parts
other than original spare parts provided by the
manufacturer
• Alterations to the product without express permission
from the manufacturer
• Use for purposes other than those described in this
manual
Dometic reserves the right to change product
appearance and product specifications.

4 General information

This section provides general information about the unit
and its components.
The images used in this document are for
I
reference purposes only. Components and
component locations may vary according to
specific product models. Measurements may vary
±0.38 in. (10 mm).
EN

4 .1 Tools and materials

Dometic recommends that the following tools and
materials be used.
Recommended tools and materials
Framing wood
Knife/box cutter
Electrical connectors
Basic electrical connection
tools
Optional parts
1
FreshJet air distribution box
spacer kit
Available as an accessory (not included). Accommodates a roof thickness
1
greater than 5.5 in. (140 mm) and includes two spare 1.2 in. (30 mm) foam
dividers and four 9-1/2 in. long bolts.

4 .2 Model identification

The model identification labels are located as follows:
• The rooftop component and serial numbers are found
on the identification label located on the bottom of
the base pan. To view the identification label, remove
the ADB cover.
• The ADB component model and serial numbers
are found on the rating plate located on the ceiling
template. To view the rating plate, look through the
filter opening.
Have this information ready before contacting
I
Dometic for service.
General information
All-weather caulk
Screwdrivers
3/8" Torque wrench socket
Torque wrench
(22.2 in. lbs/2.5 N·m)
9620006638
5