Intended Use; General Information; Tools And Materials; Model Identification - Dometic Brisk II Installation And Operation Manual

Rooftop Air Conditioner (Air Distribution Box, Mechanical Controls)

3 Intended use

The Rooftop Air Conditioner (Air Distribution Box,
Mechanical Controls), also referred to as the "product"
or "unit", is designed and intended for installation
on the roof and interior of a Recreational Vehicle
(RV) during or after the time it is manufactured. The
product is comprised of two main components: the
rooftop component and the internal air distribution box
(ADB) component.
This product can be installed by one person with brief
help from additional personnel. Use these instructions
to ensure a properly installed, and properly functioning
product.
The manufacturer accepts no liability for damage in the
following cases:
• Faulty assembly or connection
• Damage to the product resulting from mechanical
influences and excess voltage
• Alterations to the product without express permission
from the manufacturer
• Use for purposes other than those described in the
operating manual
Dometic Corporation reserves the right to modify
appearances and specifications without notice.

4 General information

This section provides general information about the unit
and its components.
I The images used in this document are for reference
purposes only. Components and component
locations may vary according to specific product
models. Measurements may vary ±0.38 in. (10 mm).
EN

4 .1 Tools and materials

Dometic recommends that the following tools and
materials be used.
Recommended tools and materials
Framing Wood
Knife/Box Cutter
Electrical Connectors
Basic Electrical Connection
Tools
Models FJX3473 and FJX3573 require a Torque Wrench (22.2 in lbs).
1
Optional parts
1
FreshJet Air Distribution Box
Spacer Kit
Available as an accessory (not included). Accommodates a roof thickness
1
greater than 5.5 in. (140 mm) and includes two spare 1.2 in. (30 mm) foam
dividers and four 9-1/2 in. long bolts.

4 .2 Model identification

The model identification labels are located as follows:
• The rooftop component and serial numbers are found
on the identification label located on the bottom of
the base pan. To view the identification label, remove
the return air vent grille from the ADB.
• The ADB component model and serial numbers
are found on the rating plate located on the ceiling
template. To view the rating plate, look through the
filter opening.
I Have this information ready before contacting
Dometic for service.
Intended use
All-Weather Caulk
Screwdrivers
3/8" Torque Wrench Socket
Torque Wrench (40 in lbs)
1
9620006638
5