General Information; Tools And Materials; Model Identification; Adb Components - Dometic FreshJet3 Series Installation Manual

Rooftop air conditioner (air distribution box, wall thermostat controls)
or improper operating or maintenance will result in
unsatisfactory performance and a possible failure. The
manufacturer accepts no liability for any injury or damage
to the product resulting from:
• Incorrect assembly or connection, including excess
voltage
• Incorrect maintenance or use of spare parts
other than original spare parts provided by the
manufacturer
• Alterations to the product without express permission
from the manufacturer
• Use for purposes other than those described in this
manual
Dometic reserves the right to change product
appearance and product specifications.

3 General information

This section provides general information about the unit
and its components.
The images used in this document are for reference
I
purposes only. Components and component
locations may vary according to specific product
models. Measurements may vary ±0.38 in. (10 mm).

3 .1 Tools and materials

Dometic recommends that the following tools and
materials be used.
Recommended tools and materials
Framing wood
Knife/box cutter
Electrical connectors
Basic electrical connection
tools
RJ-45 crimping tool
Optional parts
Part name
Spare foam divider kit
1
2-pin Molex Mini-Fit Jr. receptacle
1 Available as an accessory (not included). Accommodates a roof thickness
greater than 5.5 in. (140 mm) and includes two spare 1.2 in. (30 mm) foam
dividers and four 9-1/2 in. long bolts.
EN
All-weather caulk
Screwdrivers
3/8" torque wrench socket
Torque wrench
(22.2 in. lbs /2.5 N·m)
Dometic part number
3318198.000
Not applicable

3 .2 Model identification

The model identification labels are located as follows:
• The rooftop component and serial numbers are found
on the identification label located on the bottom of
the base pan. To view the identification label, remove
the ADB cover from the ADB.
• The ADB component model and serial numbers
are found on the rating plate located on the ceiling
template. To view the rating plate, look through the
filter opening.
Have this information ready before contacting
I
Dometic for service.

3 .3 ADB components

This section identifies the main ADB components.
q
r
t t
1 ADB components
Foam dividers
q
Ceiling template
w
ADB cover
e
General information
w
t t
e
Long bolts
r
Air filter
t
5