Using the Backlight Compensation
The camcorder contains an auto iris that adjusts the lens aperture depending on the available light
widening it under low light conditions and narrowing it v/hen bright light Is available. When the cam¬
corder is turned off the iris fully closes.
When you are filming a. subject in front of a bright¬
ly lit background, press and hold the BLC button: It
mull correct the lighting on the tape.
BIX Button
Locking the White Balance
TIulS camcorder adjusts the white balance automatically (auto white balance): Using the menu, you can
lock the optimum white balance set in the auto white balance status.
1 Set the CAM/OFF/VIDEO switch to CAM.
2 Press the MENU button: The menu display will
■ appear.
MENU
D.ZOOM
X100
AUDIO MODE 16BiT
REC.rviODE
SP
DISPLAY
LCD/LI ME
DEfilO,
AUTO
<MENU>-»brsiD
®n
^ Press the STOl^ or PLAY button to select
^ ^^WHITE BAL/L
D.ZOOM
X1{I0
AUDIO MODE teaiT
REC.MODE
SP
DISPLAY
LCD.Mi (ME
DEMO.
AUTO
<MENU,>->END
I
4 Press the FF or REW button to display "LOCK".
^D.ZOOM
X100
AUDIO MODE UBIT
RfcC.MODE
SP
DISPLAY
LCD/LIME
DEMO,
AUTO
<MENU>"»EWD
g Press the MENU button: The menu display will
disappear from the LCD monitor or viewfinder.
Note:" if the CAy/OFF/VDEO'svdtch Is set to
VIDEO, locking will be released and "AUTO" will
be specified again.
Note: if unnatural colors appear on the LCD
monitor with "VVHiTE BAL. LOCK" specified, reset
the vvtiite balance or specify "Vi/HITE BAL.
AUTO".
E42
HITACHI