Mocka Sadie Assembly Instructions

Sadie Dining Table
Assembly Instructions
Thank you for your purchase.
Please follow the instructions for correct assembly. While we took great
effort to ensure these assembly instructions were correct at the time of
printing, sometimes updates are required post production. For the most
up to date versions please refer to the product page on our website.
mocka.com.au/mocka.co.nz
A B
screw
dowel
x4 x16
F G
spring
washer
washer
x8
x8

Hardware Supplied

Phillips screwdrivers and hammer required
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
WARNING: Any furniture that is not anchored to a wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is anchored to a wall. We supply a free safety wall anchor
with all furniture sold and we recommend these are used to prevent your product tipping. The fixing device
provided should fit most wall types, but please note that different wall materials may require different fixing
devices from those supplied.
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
C D
bolt locking
x14 nut x14
I
H
plastic
Allen Key
glide x4
x1
E
bolt
x8
1