Troubleshooting Guide; Self Check - Panasonic TH-103VX200W Service Manual

High definition plasma display

Hide thumbs Also See for TH-103VX200W:

Table of Contents

TH-103VX200W

7 Troubleshooting Guide

7.1.

7.1.1.

Display Indication

1. Self-check is used to automatically check the bus line

controlled circuit of the Plasma display.

2. To get into the Self-check mode, press the

the customer controls at the bottom of the set, at the

same time pressing the OFF-TIMER button on the remote

control, and the screen will show.

If the IIC ports have been checked and found to be incorrect

Or not located then [ - - ] will appear in place of [OK]

[01] in the line of the [PTCT] means the number of blinks of the

Power LED is 1. (Reference to 7.1.2)

[H09] in the line of the [PTCT] is the error code.

To exit the CAT mode switch off the main power.

Note:

The line of the [PTCT] displays when you get into the Self-

check mode for the first time only after the Power LED

blinks.

button on

Table of Contents