Table of Contents
Advertisement
Quick Links
Important before assembly:
Read these instructions carefully before assembling or using the product.
Please check the contents of the boxes before attempting to assemble this product. The instructions will
have a checklist of parts and fittings.
Assemble the product as close to its intended final location/room as possible.
Health & Safety:
This product or some parts of this product will be heavy. Please use an assistant when lifting.
Please keep small parts out of reach of children.
Always use on a level, even surface.
DO NOT jump on the product or any of its parts.
DO NOT use this product if any parts are missing, damaged or worn.
DO NOT use this product unless all fixings are secured.
Further instructions are on the following pages.
Please keep these instructions for future reference.
Arizona Wooden Ottoman
Bed Frame 4FT6
Assembly Instructions
.
.
www.happybeds.co.uk
Advertisement
Table of Contents
Related Manuals for Happy Beds Arizona 4FT6
Summary of Contents for Happy Beds Arizona 4FT6
- Page 1 Arizona Wooden Ottoman Bed Frame 4FT6 Assembly Instructions Important before assembly: Read these instructions carefully before assembling or using the product. Please check the contents of the boxes before attempting to assemble this product. The instructions will have a checklist of parts and fittings. Assemble the product as close to its intended final location/room as possible.
- Page 2 These tools are not necessary, but may help to assemble the product. Do NOT use any power tools as this may damage the frame. (Not metal) This product or some parts of this product will be heavy. Please use an assistant when lifting. Never drag or push the pieces across a hard or stone floor as this will cause damage to the joints.
- Page 3 DIMENSIONS ARIZONA STORAGE BED 4FT6 1570 1218 2145 1450 Dimensions: (A,B,C) L500 x W165 x H235 (D,E) L759 x W165 x H235 All measurements are approximates. Page 2 of 19...
-
Page 4: Health And Safety
Important informations Please take the time to carefully read through the whole of these instructions before you commence. Keep these instructions for future referance. Unpack, inspect and check aof all of the contents. Please dispose of all packing safely. Small components parts could choke a child if swallowed. We strongly recommend that you keep children well away from the work area. - Page 5 Parts List Part Description 1pcs HEADBOARD SHELF PANEL (UPPER) 1pcs HEADBOARD SHELF PANEL (LOWER) 1pcs HEADBOARD CENTER PANEL HEADBOARD BOTTOM STORAGE PANEL 1pcs HEADBOARD DIVIDER SHELF PANEL 3pcs HEADBOARD SIDE PANEL LEFT 1pcs 1pcs HEADBOARD SIDE PANEL RIGHT 1pcs HEADBOARD TOP PANEL 1pcs HEADBOARD TOP LINING 1pcs...
- Page 6 Parts List Part Description 1pcs FOOTBOARD BIG BASE PANEL 3pcs 1pcs SMALL BASE PANEL 1pcs HYDRAULIC BASE SUPPORT (L) 1pcs HYDRAULIC BASE SUPPORT (R) 2pcs HYDRAULIC PUMP BED BASE FRONT BAR 2pcs BED BASE MIDDLE BAR 1pcs 2pcs BED BASE SIDE BAR WOOD SLATS 28pcs *All parts are numbered accordingly...
-
Page 7: Hardware List
Hardware List HARDWARE DESCRIPTION Minifix Screw 51pcs 40pcs Wood Dowel M8 x 30mm 52pcs Pan Head Screw M3.5 X 12mm 34pcs JCBB Bolt M8 X 16mm Hydraulic Metal Corner Support 2pcs JCBB Bolt M8 X 45mm 6pcs c/w NUT BRACKET, Spring & Flat Washer 14pcs JCBC Bolt M6 X 40mm JCBC Bolt M6 X 30mm... -
Page 8: Important Note
IMPORTANT NOTE Please join all of the minifix screw to the plastic holes and then joint together the panel and install the minifix lock nut in the holes and lock it, follow the example below. STEP 1: Join together the divider shelf panel (5) with the upper shelf panel (1) and lower shelf panel (2) by using hardware part (A &... - Page 9 STEP 2: Attach the headboard top lining(9) to the headboard top panel(8) and the headboard side lining (10) to the headboard side panel (6 & 7) by using hardware part (A). DO NOT use any power tools as this may damage the frame and will invalidate any claim. IMPORTANT NOTE Please join all of the minifix screws(A) to the plastic holes before you start assembly.
- Page 10 STEP 4: Attach the both headboard side panel Left (6) & Right (7) to the headboard panel (1 , 2 , 3 & 4) by using hardware parts (A & B).Then, join the headboard bottom storage panel (4) with hardware part (H) to make the headboard more stable. DO NOT use any power tools as this may damage the frame and will invalidate any claim.
- Page 11 STEP 5: Join the headboard top panel (8) to the top of divider shelf panel (5) and headboard side panel Left (6) & Right (7) by using hardware parts (A & B). DO NOT use any power tools as this may damage the frame and will invalidate any claim. STEP 6: Attach the headboard back cover (11) to the back of the completed headboard by using hardware part (C).
- Page 12 STEP 7: Firstly, Loosen the Hex Nut from the Left & Right Hydraulic Base Support ,then fix the hydraulic pump to each hydraulic base using the same Hex Nut & O. (shown in diagram 7.1) Next, fix the left & right hydraulic spacer together with hydraulic base supporter to both side rails using bolt D and then screw the minifix part A to the both side rails as (shown in diagram 7.2).
- Page 13 STEP 8: Join together the left side rail (12) and right side rail (13) with the centre storage panel (14) and back storage panel (15) by using hardware parts ( A & B ). DO NOT use and power tools as this may damage the frame and will invalidate any claim. STEP 9: Attach the completed headboard and footboard (16) by using hardware part (D).
- Page 14 STEP 10: Insert the large base panel (17) and small base panel (18) . DO NOT use any power tool as this may damage the frame and will invalidate any claim. STEP 11: Fix metal corner block (E) to the edge of footboard and side rails with bolt (D) as shown.
- Page 15 STEP 12: Join together all the bed base parts (22), (23) and (24) by using hardware parts (G) & (I). Important note: Please assemble follow arrow direction. DO NOT use any power tool as this may damage the frame and will invalidate any claim. STEP 13: Attach hardware parts (L) using hardware part (G).
- Page 16 STEP 14: Insert the slats (25) to hardware parts (J) and (K) then press into the base making sure they are secure DO NOT use any power tool as this may damage the frame and will invalidate any claim. STEP 15: Assemble the bed base on the right & left hydraulic frame and fix bolts F starting from '15.1' to '15.3' as shown.
- Page 17 STEP 16: Tighten all bolts and screws now. Top view of assembly bed. DO NOT use any power tool as this may damage the frame and will invalidate any claim. HEADBOARD FOOTBOARD STEP 17: Stick the round white stickers (Q) to the minifix bolt to make the holes colour look same. Page 16 of 19...
- Page 18 " IMPORTANT NOTE " WHEN THE BED IS BUILT AND THE MATTRESS FRAME IS AT 45 DEGREE ANGLE PLEASE PLACE THE MATTRESS ON THE BED. PLEASE NOTE THAT THE WEIGHT OF THE MATTRESS IS REQUIRED TO HELP CLOSE THE BED. TO LOWER THE SLEEPING PLATFORM STAND AT THE SIDE RAIL OF THE BED AND PUSH SHARPLY DOWNWARDS USING BOTH HANDS.
- Page 19 CAUTION : PLEASE USE HYDRAULIC PUMP STOPPER FOR SAFETY PURPOSE HYDRAULIC PUMP STOPPER (LOCK IN) (LOCK OUT) Page 18 of 19...
-
Page 20: General Care
General Care Wipe clean with a slightly damp soft cloth. Avoid the use of all household cleaners and abrasives. When moving your furniture, carefully lift into place. never drag or push the pieces across the floor as this will cause damage to the joints and could result in failure to the product that will invalidate the warranty. - Page 21 Important for Ottoman and other gas lift beds Please follow these final steps to ensure the best experience with your new bed • Please ensure the pistons are fitted to the bed frame. • Please place the mattress on top of the bed frame. •...
-
Page 22: General Care And Maintenance
Please dispose of all packaging safely. General Care & Maintenance Wipe clean with a slightly damp cloth. Avoid the use of all household cleaners and abrasives. Periodically check all screw & fixings to ensure they are secure. When moving your product, carefully lift into place. Never drag or push the product across the floor as this will cause damage to the joints.