Happy Beds Atelier AT/1000W Assembly Instructions Manual

Low end bed

Important before assembly:

Read these instructions carefully before assembling or using the product.

Please check the contents of the boxes before attempting to assemble this product. The instructions will

have a checklist of parts and ﬁttings.

Assemble the product as close to its intended ﬁnal location/room as possible.

Health & Safety:

This product or some parts of this product will be heavy. Please use an assistant when lifting.

Please keep small parts out of reach of children.

Always use on a level, even surface.

DO NOT jump on the product or any of its parts.

DO NOT use this product if any parts are missing, damaged or worn.

DO NOT use this product unless all ﬁxings are secured.

Further instructions are on the following pages.

Please keep these instructions for future reference.

Atelier Low End Bed -

Double/King/Super King

Assembly Instructions

www.happybeds.co.uk

Table of Contents

Do you have a question about the Atelier AT/1000W and is the answer not in the manual?

Page 1 Atelier Low End Bed - Double/King/Super King Assembly Instructions Important before assembly: Read these instructions carefully before assembling or using the product. Please check the contents of the boxes before attempting to assemble this product. The instructions will have a checklist of parts and ﬁttings. Assemble the product as close to its intended ﬁnal location/room as possible.
Page 2 These tools are not necessary, but may help to assemble the product. Do NOT use any power tools as this may damage the frame. (Not metal) This product or some parts of this product will be heavy. Please use an assistant when lifting. Never drag or push the pieces across a hard or stone floor as this will cause damage to the joints.
Page 3 Willis & Gambier Atelier Bedroom Collection Low end bed 135(Product Code AT/1000W) Low end bed 150(Product Code AT/1001W) Low end bed 180(Product Code AT/1002W) Step By Step Assembly Instructions PRE-ASSEMBLY PREPARATION 1. Please check the pack contents before attempting to assemble this product. A full checklist of components is given in this leaflet.
Page 7 Please dispose of all packaging safely. General Care & Maintenance Wipe clean with a slightly damp cloth. Avoid the use of all household cleaners and abrasives. Periodically check all screw & ﬁxings to ensure they are secure. When moving your product, carefully lift into place. Never drag or push the product across the ﬂoor as this will cause damage to the joints.

Atelier at/1001wAtelier at/1002w