1. Manuals
  2. Brands
  3. Happy Beds Manuals
  4. Indoor Furnishing
  5. Arabella
  6. Assembly instructions manual

Happy Beds Arabella Assembly Instructions Manual

Fabric drawer bed - 5ft king size
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Important before assembly:
Read these instructions carefully before assembling or using the product.
Please check the contents of the boxes before attempting to assemble this product. The instructions will
have a checklist of parts and fittings.
Assemble the product as close to its intended final location/room as possible.
Health & Safety:
This product or some parts of this product will be heavy. Please use an assistant when lifting.
Please keep small parts out of reach of children.
Always use on a level, even surface.
DO NOT jump on the product or any of its parts.
DO NOT use this product if any parts are missing, damaged or worn.
DO NOT use this product unless all fixings are secured.
Further instructions are on the following pages.
Please keep these instructions for future reference.
Arabella Fabric Drawer
Bed - 5FT King Size
Assembly Instructions
.
www.happybeds.co.uk

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Arabella and is the answer not in the manual?

Questions and answers

Related Manuals for Happy Beds Arabella

Summary of Contents for Happy Beds Arabella

  • Page 1 Arabella Fabric Drawer Bed - 5FT King Size Assembly Instructions Important before assembly: Read these instructions carefully before assembling or using the product. Please check the contents of the boxes before attempting to assemble this product. The instructions will have a checklist of parts and fittings.
  • Page 2 These tools are not necessary, but may help to assemble the product. Do NOT use any power tools as this may damage the frame. (Not metal) This product or some parts of this product will be heavy. Please use an assistant when lifting. Never drag or push the pieces across a hard or stone floor as this will cause damage to the joints.
  • Page 3 Assembly Instructions Before you begin... Please check in your desired room of use. Unpack all boxes and lay out each component on the floor. Check your product for any damage that may be immediately obvious. If damage is identified, please contact your retailer. Please read through these instructions thoroughly to ensure you have constructed your bed correctly.
  • Page 4 Box 1 1.Headboard (x1) 5.Headboard Legs (x2) Box 2 2.Footboard (x1) 3.Side Rail (x2) 4.Slats (x16) Centre Rail (x1) Support Leg Legs (x2) (x2) Footboard Front Panel (x1) Side Rail Front 18.Side Rail Support Panel (x2) (x4) Box 3 Footboard Back Panel .Footboard &...

  • Page 5: Step 1

    Box 3 I.Roller (x14) Hardware All fitting are stored within Box 2 D.M3.5 x 16 mm A.Wood Dowel (x8) B.M6 x 40 mm JCBC (x2) C.Adjuster (x2) E.M6 x 50 mm JCBC (x6) CSK (x56+1) F.M4 x 28 mm CSK (x8) G.M4 x 32 mm CSK (x71) H.M4 x 50 mm CSK(x28) J.Power Nail...

  • Page 6: Step 2

    Step 2 Tighten the 2x legs (8) to the footboard (2) using 4x M4 x 50mm CSK (H) as shown. Step 3 Attach the 2x headboard legs (5) to the headboard (1) using 6x JCBC M6 x 50mm (E), 6 x SringWasher (N) and 6 x Flat Washer (O) using Allen Key (K).
  • Page 7 Step 5 Attach 2x side rail (3) to headboard (1) and footboard (2) by loosening the bolts and pushing the bracket down to fit. Step 6 Attach the 2x support legs (7) to the centre rail (6) of the bed using 2x JCBC M6 x 40mm (B) with M4 allen key (K) as shown.

  • Page 8: Table Of Contents

    Step 9 Step 10 Attach the 3x bottom panel big support ( 16) and 2x Bottom panel small support ( 17) Tighten the 6x roller (I) with 24x M3.5 x 16 mm CSK (D) using screw driver using 16x M4 x 32mm CSK (G) and a screw driver (not included). Then secure the (not included) .
  • Page 9 Step 15 Attach all drawers to the bed and assemble the 6x metal stopper (M). Tighten all the 4 corners with 1x M5 Allen Key (L). ATTENTION: prevent the drawer from being pulled out too far and drop It is optional to choose attach the drawer stopper.

  • Page 10: General Care And Maintenance

    Please dispose of all packaging safely. General Care & Maintenance Wipe clean with a slightly damp cloth. Avoid the use of all household cleaners and abrasives. Periodically check all screw & fixings to ensure they are secure. When moving your product, carefully lift into place. Never drag or push the product across the floor as this will cause damage to the joints.

Table of Contents