Table of Contents
Advertisement
Available languages
Available languages
CAUTION
Always remove the plug 7 from the power
►
socket before filling the appliance! There is a
risk of electric shock!
Remove the water tank 1 by sliding back the
♦
release 4 of the water tank 1 until you can lift
the water tank 1 up. Grip the water tank 1
by the protruding gripping aids with your thumb
and index finger and lift it up vertically. The tem-
perature control 3 stays on the appliance and
is not removed along with the water tank.
Open the filler opening 2 in the water tank 1.
♦
Use the measuring cup t to fill the water tank 1
♦
with water to the "Max" marking.
Close the filler opening 2 in the water tank 1.
♦
Ensure that the collar in the filler opening 2
locks into the notch on the lid. This means that
the water tank 1 is properly closed.
Replace the water tank 1 onto the appliance.
♦
The water tank 1 must audibly click into the
release of the water tank 4.
Attaching/removing the brush
extension
CAUTION
Never remove or attach the brush extension w
►
while the appliance is hot.
Risk of burns!
♦
To use the steam and brush functions, please at-
tach the brush extension w to the steam brush.
To do this, push the brush extension w onto
♦
the appliance along the guide aid until it is fully
attached. The release of the brush extension q
must click into place audibly.
♦
To use the ironing function, please remove the
brush extension w from the steam brush.
To do this, push the release q downwards and
♦
pull the brush extension w off the appliance.
SDRB 1000 B1
Steam brush function
Attach the brush extension w to the appliance.
♦
It must audibly click into the release of the brush
extension q.
Insert the plug 7 into a properly installed and
♦
grounded wall socket.
To produce steam, set the temperature control 3
♦
to ••• or higher. The heat-up indicator lamp 5
lights up. As soon as the selected temperature
has been reached, the heat-up indicator lamp 5
goes out.
NOTE
►
To use the steam burst function, set the tem-
perature control 3 to ••• or higher.
Lower temperatures are insufficient for pro-
ducing a burst of steam.
♦
You can now produce a burst of steam by press-
ing the steam burst button 8.
NOTE
►
To produce the first burst of steam after heat-
ing the appliance, you may have to press the
steam burst button 8 several times in a row.
The appliance is now ready for use.
CAUTION
►
The steam brush can be used with any piece
of clothing. Be careful when treating heat-
sensitive textiles such as synthetics, polyamide
or artificial silk. Before treating such materials,
first process a small test patch in an invisible
spot (inside of the seam) to ensure that the hot
steam does not damage the material. Do not
apply the hot ironing sole 0 to these materi-
als directly. Only use the steam burst function.
GB │ IE│
7
■
Advertisement
Chapters
Table of Contents
