Subscribe to Our Youtube Channel
Related Manuals for DREAMS 820-00758
Summary of Contents for DREAMS 820-00758
- Page 1 Sleigh Changer Product code 820-00758 IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY ! One adult 15 minutes approx assembly time assembly required...
-
Page 2: Assembly Tips
Thank you Hello, thanks for choosing to purchase your furniture from Dreams - you're now on your way to creating a functional and fabulous room. Before you begin building your furniture, please take a moment to read through the instructions and make sure that you've got all the relevant parts listed on the following pages. -
Page 3: Parts List
Parts Important infomation Please check you have all the parts listed below with your product: Do not discard any of the packaging until you have checked that you have all the parts and the pack of fixings. Recommended changing mat: 780mm x 480mm, the changing area is suitable for use up to 12 months old or 11kg in weight. This Sleigh Changer complies with BS EN 12221-1:2008+A1:2013 &... - Page 4 Bar handles assembly Use Pack 1 We recommend that you build your new furniture in the room you’d like it to be located - this will help prevent any risk of damage to your newly One adult built furniture whilst moving it. assembly required Unscrew all Bar handles (2) from the backside of Drawer fronts, then re-assemble them to the front side of Drawer fronts with Bolts (3) as indicated.
- Page 5 Tip over restraint assembly Use Pack 1 The changer is supplied with a fixing kit, help to guard against accidental tipping. Installation only to be carried out by a competent person. Check the suitability of the wall before fitting. This hardware is only deterrent. Adult supervision is the only proper deterrent to prevent improper use of the units. Tipping furniture may injure young children.
- Page 6 Ensure that the wall strap is used to securely attach the sleigh changer to the wall to prevent tipping. Do not use replacement parts that are not recommended or supplied by Dreams. Do not place your product in the near vicinity of open fires or other sources of strong heat, such as electric or gas fires.
-
Page 7: Care And Maintenance
Care and maintenance Here are some tips to keep your new furniture in tip-top condition Cleaning To clean your new furniture, we'd advise using a warm damp cloth - please do not use abrasive chemicals or bleach as this may damage the product. Checking and moving Periodically we recommend you check that the screws or fixtures haven't been become loose, over time. - Page 8 Little dreamers Keep the little ones entertained while you assemble your new purchase.
Need help?
Do you have a question about the 820-00758 and is the answer not in the manual?
Questions and answers