DREAMS Mid Sleeper Assembly Instructions Manual

Mid Sleeper
Assembly Instructions
Dimensions mm Length
2039
Single
Need assistance?
Call: 0344 292 0000
IMPORTANT: Read these instructions
carefully before attempting to assemble.
Retain these instructions for future
reference.

Helpful advise before you begin:

1. We suggest you spend a short time reading through this leaflet
and then follow the simple step by step instructions.
2. If you follow the instructions carefully the end result should be
worth the effort.
3. Do not discard any of the packaging until you have checked that
you have all the parts and the pack of fittings.
4. Assemble this product on a carpet.
5. To ensure an easier assembly, we strongly advise that all fittings
are only finger tightened during initial assembly. Only upon
completion of the assembly should all fixing points be fully
tightened.
6. We recommend a periodic check on all fixing points to make
sure they remain fully tightened.
7. Keep glue and fittings out of children's reach.
8. Do not use any other tools other than those recommended to
build this product.
9. Please do not use substitute parts. Use only additional or
replacement parts supplied by Dreams Ltd.
10. In the unlikely event that this product has missing or damaged
parts, please call 0344 292 0000 to obtain spares.
Width Height
1031 1500
1
Page 1 of 11
You will require a cross
head screwdriver
2 x people recommended to
assemble this product
Approximate time to
assemble this product
Retain these instructions
for future reference
Do not discard any of the
packaging until you have
checked that you have all the
parts and the pack of fixings.