Grip Heating - BMW Motorrad K 1600 B Rider's Manual

Replacing battery of
remote control
with central locking system
with alarm system (DWA)
without Keyless Ride
If you press a button on the re-
mote control and the LED does
not show or lights up only briefly:
Replace the battery of remote
control.
Open lid of battery compart-
ment 1.
Dispose of the old battery in
accordance with all applicable
laws and regulations; do not
attempt to dispose of batteries
as domestic waste.
OE
ATTENTION
OE
Unsuitable or incorrectly in-
OE
serted batteries
Component damage
Use a battery compliant with
the manufacturer's specifica-
tions.
When inserting the battery,
always make sure polarity is
correct.
Insert the new battery with the
positive terminal up.
Battery type and battery
rated voltage
For remote control
CR 1632 Lithium
3 V
The LED on the remote control
lights up; the remote control
has to be synchronised.
Press button 1 twice.
LED 3 flashes for a few
seconds.
The remote control is again
ready for use.

Grip heating

Operating the grip heating
Start the engine.
NOTICE
The heating in the heated
handlebar grips can be activated
only when the engine is
running.
4
87
z