Delivery Transport; General Description - Pentair INVERTEMP FL Series Installation And Operating Manual

DELIVERY TRANSPORT

When you have unpacked the HP, please check the content to report any damage. Please also check that the pressure reading on the pressure gauge is equal to
the pressure mentioned on the box, depending on the measured outdoor temperature, as different values might indicate a leak.
The HP should always be stored and transported in a vertical position, on a pallet and inside its original packaging.
Transporting and/or storing the HP horizontally will void the guarantee.

GENERAL DESCRIPTION

Manufacturer' s plate
Pressure gauge
Control screen
Access hatch to
electrical connections
230V AC electric
supply inlet
RS485 cable passage
(option)
Side protective grids
of the evaporator
Rear protective grid of the evaporator
30
25 35
20 40
49
42 56
33 62
15 28 45
23 67
17
72 50
10 10
R32 static °C / bar
0
-9 Classe 1.6
5 -20 55
°C 10 bar = 1 MPa = 145 psi
0 Bar 60
OUT
InverTemp™-FL 1M IVTP-1M-FL
QC Passed MADE IN CHINA
Pentair International Sarl S/N 1234ABCD1234ABCD1234ABCD01 Mfg Year
Avenue de Sévelin 18 230V 50Hz~ / IPX4 / 2400 W ME SCAN
CH-1004 Lausanne Nov-2019
IN
Water inlet Hot water outlet
Fan air outlet
Condensate evacuation
Installation pads
(under hoods)
3