Advertisement
Quick Links
PENTAIR INVERTEMP® DB
INSTALLATION AND OPERATING MANUAL
IMPORTANT SAFETY INSTRUCTIONS,
PLEASE READ AND FOLLOW ALL THE INSTRUCTIONS,
KEEP THESE INSTRUCTIONS
PENTAIR AQUATIC SYSTEMS
(Rev. 12/2020)
Download the manual available in EN / FR / NL / DE / IT / ES on www.pentairpooleurope.com
i =
IVTP-1M-DB
IVTP-2M-DB
IVTP-3M-DB
IVTP-4M-DB
IVTP-5M-DB
IVTP-6M-DB
EN
R32
15
Advertisement
Related Manuals for Pentair INVERTEMP IVTP-1M-DB
Summary of Contents for Pentair INVERTEMP IVTP-1M-DB
- Page 1 PENTAIR INVERTEMP® DB IVTP-1M-DB IVTP-2M-DB IVTP-3M-DB IVTP-4M-DB IVTP-5M-DB IVTP-6M-DB INSTALLATION AND OPERATING MANUAL IMPORTANT SAFETY INSTRUCTIONS, PLEASE READ AND FOLLOW ALL THE INSTRUCTIONS, KEEP THESE INSTRUCTIONS PENTAIR AQUATIC SYSTEMS (Rev. 12/2020) Download the manual available in EN / FR / NL / DE / IT / ES on www.pentairpooleurope.com...
- Page 2 III electrical surge, the manual will mention that the disconnection means must be integrated in the brands of third parties used in the present document are not used to indicate any affiliation or endorsement between the owners of these trade names and Pentair. Those names and brands may be fixed wiring, as per relevant wiring rules.
- Page 3 4,5 - 5 4,2 - 4,6 4,3 - 4,6 (boost Mode) InverTemp™-DB 1M QC Passed MADE IN CHINA IVTP-1M-DB Pentair International Sarl Avenue de Sévelin 18 S/N 1234ABCD1234ABCD1234ABCD01 Mfg Year SCAN CH-1004 Lausanne 230V 50Hz~ / IPX4 / 2400 W Nov-2019...
- Page 4 INSTALLATION (SITE, TYPE OF SUPPORT, NECESSARY SPACE) DIMENSIONS: – Install the HP outdoors at more than 2 metres from the pool, as per applicable laws (NF C 15 100). – Place the HP on the provided vibration absorbers on a surface that is stable, solid (able to bear the weight of the device) and level (prepare a concrete base if necessary).
- Page 5 ELECTRICAL CONNECTIONS: Connection of the power supply: Heating priority: – Prior to undertaking any intervention inside the HP, it is imperative to disconnect the power supply from the HP: there is a risk of electrocution that can cause The filtration pump can be connected to the HP to force the filtration to operate if the water is not at the desired temperature. damages, severe injuries, and even death.
- Page 6 SETTINGS: REGULATION (ELECTRONIC CONTROL UNIT) Water flow setting: – To optimise the heating performance and achieve power savings, the flow of water travelling through the HP should be adjusted. Selected mode Rotating fan P1-P2 relays for 10:43 10:43 – The adjustment is done based on the reading of the adjustment pressure gauge. The adjustment is done by opening or closing the adjustment valve of the activated swimming 2020 bypass.
- Page 7 Power the device back up. Remote controlling by connection to the RS-485 Your HP can be controlled through a dry contact (switch) or the Pentair RS-485 bus. 4: Pull a suitably-sized cable through the 1: Open the top hood by unscrewing...
- Page 8 CIRCUIT DIAGRAMS RECYCLING THE HP When your HP reaches the end of its lifespan and you do not wish to keep it, do not throw it out with household waste. IVTP-1M-DB IVTP-2M-DB IVTP-3M-DB IVTP-4M-DB The HP must be brought to a selective recycling point for its reuse or recycling. Reactor COMPRESSOR FAN MOTOR...
- Page 9 Ave. de Sévelin 20, CH-1004 - LAUSANNE, Switzerland Copyright - Limited license: unless expressly authorised herein, no part of the content of the present document can be reproduced in any form or by any means without the prior written authorisation by Pentair International SRL.