Lubrication
Greasing the Drive Shaft and U-Joint
Grease Type: General purpose grease.
1. Clean the grease fittings with a rag.
2. Pump grease into the fittings until grease begins to ooze out of the bearings
(approximately 3 pumps).
3. Wipe up any excess grease.
Greasing the Plow
Grease Type: General purpose grease.
1. Clean the grease fittings with a rag.
2. Pump grease into the fittings until grease
begins to ooze out of the bearings
(approximately 3 pumps).
3. Wipe up any excess grease.
3467-222A
G462130
G462131
Page 7–4
Maintenance: Lubrication