Belt Maintenance; Checking The Drive Belt Tension; Adjusting The Drive Belt - Toro 25545T Operator's Manual

Belt Maintenance

Checking the Drive Belt Tension

The belt is properly tensioned when it moves about 7–10 mm (1/4–3/8 inch) when you push
it at the long span.
Check the belt for excessive slack, damage, or
wear.

Adjusting the Drive Belt

1. Loosen the pivot and 2 alternator bolts.
2. Adjust the alternator position as needed.
3. Check the belt tension.
4. Tighten the pivot and alternator bolts.
3467-222A
G418844
Page 7–16 Maintenance: Belt Maintenance