Checking the Hydraulic Fluid Level
1. Remove the cap from the filler neck
check the fluid level on the dipstick
2. Add fluid as needed.
3. Install the cap.
Changing the Hydraulic Fluid
1. Remove the upper left panel of the console
2. Remove the hydraulic tank cap
pump to empty the hydraulic tank.
3. Remove the lower right side cover plate and
loosen the hose clamp holding the suction
hose to the hydraulic tank
4. Remove the left side cover plate and loosen
the 3 hose clamps under the hydraulic tank
.
5. Disconnect the electrical lead to the fluid
temperature sensor at the bottom of the
reservoir
3467-222A
.
.
and
.
g023716S
.
and use a
G416163
G416161
Page 7–20
Maintenance: Hydraulic System Maintenance