Table of Contents
Advertisement
Storage Safety
• Shut off the engine, remove the key (if applicable), wait for all moving parts to stop, and
allow the machine to cool before storing it.
• Do not store the machine or fuel near flames.
Preparing the Machine for Storage Over 30
Days
1. Clean the machine.
2. Grease the machine.
3. Before long term storage, wash the attachment with mild detergent and water to remove
dirt and grime.
4. Check the condition of the hydraulic hoses. Replace any damaged hoses.
5. Ensure that all hydraulic couplers are connected together to prevent contamination of
the hydraulic system.
6. Prepare the engine.
A. Service the air cleaner.
B. Change the engine oil.
7. Check and tighten all fasteners. Repair or replace any worn, damaged, or missing parts.
8. Paint all scratched or bare metal surfaces with paint available from your Authorized
Service Dealer.
9. Store the machine in a clean, dry garage or storage area. Remove the key from the
ignition switch and keep it in a memorable place.
10. Cover the machine to protect it and keep it clean.
Decommission the Machine
Before decommissioning the machine, follow local regulations for disposing of hazardous
substances. For more information on draining fluids, see the Maintenance chapter or
contact your Authorized Service Dealer.
Storage
Page 8–1
Chapter 8
Storage
3467-222 A
Advertisement
Table of Contents
