Replacing the Battery
Warning
The BT1 Battery must not be recharged, forced open, or disposed of in fire.
if abused, this battery represents a fire, explosion, or severe burn hazard.
tá
Dispose of the battery in accordance with local-hazardous-material disposal
regulations.
1. To remove the battery, remove the two screws on the rear-panel securing the battery cover
and remove the cover.
2. Remove the battery
3. Replace the battery, positive (+) end in.
4. Replace the battery cover. Replace the two battery cover screws and tighten them to 6
inch- pounds.
5. Turn the power ON, wait 15 seconds, turn the display OFF, then back ON again.
BATTERY
3.6
V
ONLY
(+)
END
IN
BATTERY
COVER
BATTERY COVER SCREWS
(2 PLACES)
Figure 1-4. Replacing the Battery
1-10
General Information