Table of Contents
Advertisement
Options
The following options are available and can be ordered from the nearest Hewlett-Packard Sales
and Service Office.
Table 1-3. Options for the HP 70206A
Option number
HP Part Number
400
400 Hz Input
70206-60047
Isolation Transformer
913
Rack mount
5061-9678
with handles
Rack mount
5061-9684
without handles
Rack slide
1494-0059
W30
Two Year (2) Additional
Return-to-HP Service
Cabinet Interconnect Kit
5061-9061
Display to Mainframe
400 Hz Option (HP 70206A System Graphics Display)
The display is available with an option that allows it to run on a power-line frequency of
400 Hz. Option 400 uses an external in-line transformer for user with a 400 Hz power source.
Refer to Table 1-3 for ordering information.
)
Warning
DO NOT operate a 400 Hz Option instrument on a 400 Hz power line without the
attached in-line isolation transformer. Failure to follow this precaution can result
)
ý
.
in personal injury.
The in-line isolation transformer must be removed for 60 Hz power-source operation. Failure
to remove the in-line transformer may result in a blown fuse. When you remove the isolation
transformer, use a standard power cord. Reinstall the in-line isolation transformer for use with
a 400 Hz power source. This protects the user from shock hazard.
Rack-Mount Installation (HP 70206A System Graphics Display)
Bench Operation
Plastic feet and a fold-away tilt stand are included witk the HP 70206A display to provide
bench operation convenience. The plastic feet are designed to be self-aligning when systems
are stacked.
Note
Be sure to use the correct hardware when replacing part, since both metric
i
and English hardware are used with these instruments.
Y
1-6
General Information
Advertisement
Table of Contents
