TAN: (-) AUX OUTPUT (TRUNK POP) or DOME LIGHT ILLUMINATION OUTPUT
This output is programmable for 3 modes of operation. See Programming Option #9 Section.
1. 30 second Dome Light output.
2. Momentary ½ second output (Default).
Momentary Push and Hold. The output stays on until Transmitter button is released.
3.
Note: Some vehicles like Lexus and Toyota require a 2 to 3 second output for the Trunk Pop to operate. This output is
selectable for Momentary ½ second (default) or a Momentary Press and Hold function.
TRUNK OUTPUT or DOME LIGHT
TAN
Trunk Soleniod
(Default)
-OR-
Dome Light
Circuit
WIRING
+12V CONSTANT
85
86
30
87
* Test activation circuit in vehicle.
Connect to+12V for Positive circuits
or Ground for Negative circuits. Relay
not included.
5
+12V CONSTANT
OR *