CrimeStopper Cool Start RS-7 Installation Instructions Manual page 17

Option
Option Description
#
9 Brown wire function
"Wake Up" pulse on Unlock
10
(1-sec. +12V to IGN)
11 Manual Transmission Mode
12 Yellow/black wire function
13 Horn Chirp Confirmation
14 Unlock with Trunk Pop
15 Timed Crank or Tach Monitor
16 Horn Pulse (Chirp)
OEM Interface Green input wire
17
Starter Cranking Time
18
(Option #15 is set to Timed Crank)
19 Diesel Glow Plug Delay
20 Remote Start Engine Run Time
Smart Tachless Voltage Adjustment
21
22 Turbo Timer Mode 1 to 5 Minutes
23 Reset Options to default (*)
OPTION DESCRIPTIONS:
1. Engine Monitoring:
This option sets how the unit monitors your engine. You can program either for Tach mode in which the unit uses a Tach
signal (RPM) or for Tachless mode that monitors voltage level. See pages 12-15 for more information and additional
steps for actual Tach learning and Tach finder modes.
(RS-1300DP)
79-100%
TX Button #2
TX Button #1
Default Value
Dome Light *Trunk pop*
ON
ON
Anti-Grind *Ignition Output*
1 Press
Unlock/Trunk pop *Trunk pop only*
Pre-Set *Tach Monitor*
*Short 0.02
Long 0.04 Sec.
3 pulse
0.75 Sec.
*Monitor Glow
10 Seconds
12 Minutes *24 Minutes*
-1%
Brake Pedal Set
*Always Set Mode*
Mode
*Reset All Options*
17
TX Button
#3
Press and
Hold
*OFF*
*OFF*
*2 Press*
Seconds*
*1 Pulse*
*0.5 Sec.* 1.0 Sec.
20 Seconds
Plug
36 Minutes
Set to 93%
+1%
default
Idle Down
Mode
TX Button
#4
1.5 Sec.
30 Seconds
48 Minutes