National Instruments NI cDAQ-9139 User Manual page 119

Eight-slot controller
Hide thumbs Also See for NI cDAQ-9139:
Table of Contents

Advertisement

Boot Setup Menu
Security Menu
Save & Exit Menu
Changing BIOS settings can cause incorrect controller behavior, including failure to boot. In
general, do not change a setting unless you are absolutely sure what the setting does. Refer to
the
Resetting the System CMOS and BIOS Settings
Controller, for information about restoring the default configuration settings.
cDAQ
Launching the BIOS Setup Utility
Complete the following steps to launch the BIOS setup utility:
1.
Connect a VGA monitor to the video (VGA) port on the cDAQ controller.
2.
Connect a USB keyboard to one of the USB ports of the cDAQ controller.
3.
Power on or reboot the cDAQ controller.
4.
Hold down either the <F10> key or the <Del> key until the message
boot device:
5.
Use the Down Arrow key to select
loads after a short delay.
The Main setup menu is displayed when you first enter the BIOS setup utility.
The Main setup menu is displayed when you first enter the BIOS setup utility. Use the keys listed
in Table A-1 to navigate through the BIOS setup utility.
Key(s)
Left Arrow,
Right Arrow
Up Arrow,
Down Arrow
<Enter>
<Esc>
<+>, <->
<Tab>
appears onscreen.
Table A-1. BIOS Setup Utility Keyboard Navigation
Move between the different setup menus. If you are in a submenu, these
keys have no effect, and you must press <Esc> to leave the submenu first.
(To use the arrows on the numeric keypad, you must disable Num Lock.)
Move between the options within a setup menu. (To use the arrows on the
numeric keypad, you must disable Num Lock.)
Either enters a submenu or displays all available settings for a highlighted
configuration option.
Returns to the parent menu of a submenu. At the top-level menus, this key
serves as a shortcut to the Exit menu.
Cycle between all available settings for a selected configuration option.
Selects time and date fields.
section of Chapter 1,
and press <Enter>. The setup utility
Enter Setup
Function(s)
NI cDAQ-9138/9139 User Manual
Getting Started with the
Please select
© National Instruments | A-3

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ni cdaq-9138Ni cdaq-9133

Table of Contents