Table of Contents
Advertisement
Display warnings
Message
lights up on the
display, the
refrigeration
appliance does
not get cold even
though the
controls and the
interior lighting
are working.
is lit up on the
display and the
refrigeration
appliance cannot
be used.
Nothing is visible on the
display. The display is
completely blank.
is lit up on the
display and the
appliance cannot
be used.
Cause and remedy
Demo mode has been activated.
Touch OK.
Miele
will appear initially in the display, followed by
the start screen.
Touch OK.
In Settings mode , use the or sensor
control to scroll to the symbol.
Touch OK.
After demo mode has been switched off, the
refrigeration appliance switches off and must be
switched on again.
The Cleaning mode function is still switched on.
Touch the OK sensor control on the control panel
to switch off Cleaning mode.
will appear in the display.
Touch OK.
When Cleaning mode is switched off, the dot in
the upper corner of the display goes out.
Use the or sensor control to scroll to the
symbol and touch OK.
The refrigeration appliance will start cooling again.
Energy-saving mode is switched on. If the
appliance has not been operated for a while (approx.
10 minutes), the display is switched off.
Touch the display.
The display shows the most recent indication.
The lock function has been activated.
Unlock the refrigeration appliance temporarily or
switch the lock function off completely (see
"Selecting further settings – Deactivating the lock
function / temporarily/switching off
completely").
Problem solving guide
69
Advertisement
Table of Contents
