Connecting The Electrical Wiring; About Connecting The Electrical Wiring; Precautions When Connecting The Electrical Wiring - Daikin RXP20N5V1B9 Installer's Reference Manual

8 | Electrical installation

8.2 Connecting the electrical wiring

8.2.1 About connecting the electrical wiring

8.2.2 Precautions when connecting the electrical wiring

Installer reference guide
46
Typical workflow
Connecting the electrical wiring typically consists of the following stages:
1 Making sure the power supply system complies with the electrical
specifications of the units.
2 Connecting the electrical wiring to the outdoor unit.
3 Connecting the electrical wiring to the indoor unit.
4 Connecting the main power supply.
DANGER: RISK OF ELECTROCUTION
WARNING
▪
All wiring MUST be performed by an authorised electrician and MUST comply
with the national wiring regulation.
▪
Make electrical connections to the fixed wiring.
▪
All components procured on-site and all electrical construction MUST comply
with the applicable legislation.
WARNING
ALWAYS use multicore cable for power supply cables.
WARNING
If the supply cord is damaged, it MUST be replaced by the manufacturer, its service
agent or similarly qualified persons in order to avoid a hazard.
WARNING
Do NOT connect the power supply to the indoor unit. This could result in electrical
shock or fire.
WARNING
▪
Do NOT use locally purchased electrical parts inside the product.
▪
Do NOT branch the power supply for the drain pump, etc. from the terminal
block. This could result in electrical shock or fire.
WARNING
Keep the interconnection wiring away from copper pipes without thermal insulation
as such pipes will be very hot.
R32 split series
4P751614-2 – 2023.09