Electrical Installation; About Connecting The Electrical Wiring; Precautions When Connecting The Electrical Wiring - Daikin CTXM15A2V1B Installer's Reference Manual

Hide thumbs Also See for CTXM15A2V1B:
Table of Contents

Advertisement

8 Electrical installation

In this chapter

8.1 About connecting the electrical wiring

8.1.1 Precautions when connecting the electrical wiring

CTXM-A, FTXM-A, ATXM-A
Daikin room air conditioner
4P518023-17P – 2023.06
8.1
About connecting the electrical wiring ..................................................................................................................................
8.1.1
Precautions when connecting the electrical wiring ..............................................................................................
8.1.2
Guidelines when connecting the electrical wiring ................................................................................................
8.1.3
Specifications of standard wiring components .....................................................................................................
8.2
To connect the electrical wiring to the indoor unit ...............................................................................................................
8.3
To connect optional accessories (wired user interface, central user interface, etc.)...........................................................
Before connecting the electrical wiring
Make sure the refrigerant piping is connected and checked.
Typical workflow
Connecting the electrical wiring typically consists of the following stages:
1
Making sure the power supply system complies with the electrical
specifications of the units.
2
Connecting the electrical wiring to the outdoor unit.
3
Connecting the electrical wiring to the indoor unit.
4
Connecting the main power supply.
DANGER: RISK OF ELECTROCUTION
WARNING
All wiring MUST be performed by an authorised electrician and MUST comply
with the applicable national wiring regulation.
Make electrical connections to the fixed wiring.
All components procured on-site and all electrical construction MUST comply
with the applicable legislation.
WARNING
ALWAYS use multicore cable for power supply cables.
INFORMATION
Also read the precautions and requirements in the
4
precautions" [
INFORMATION
Also read
"8.1.3 Specifications of standard wiring
 7].
8
Electrical installation
|
"2  General safety
4
components" [
 40].
Installer reference guide
37
37
38
40
40
41
37

Advertisement

Table of Contents
loading

Table of Contents