Advertisement
Quick Links
I-7018Z, M-7018Z Quick Start Guide
Warranty
All products manufactured by ICP DAS are under warranty regarding defective materials for a period of one year from the date
of delivery to the original purchaser.
Warning
ICP DAS assumes no liability for damages resulting from the use of this product. ICP DAS reserves the right to change this
manual at any time without notification. The information furnished by ICP DAS is believed to be accurate and reliable.
However, no responsibility is assumed by ICP DAS for its use, or for any infringements of patents or other rights of third
parties resulting from its use.
Packing List
I-7018Z
M-7018Z
I-7018Z-G/S
V
M-7018Z-G/S
I-7018Z-G/S2
V
M-7018Z-G/S2
Internal I/O Structure
Pin Assignments
DB-1820
DN-1822
V
V
CA-252518D
Plastic Rail
V
V
V
Pin Assignments (CON1)
Quick Start
CD
Guide
V
V
V
V
Page 1
Advertisement
Related Manuals for ICP DAS USA I-7018Z Series
Summary of Contents for ICP DAS USA I-7018Z Series
- Page 1 I-7018Z, M-7018Z Quick Start Guide Warranty All products manufactured by ICP DAS are under warranty regarding defective materials for a period of one year from the date of delivery to the original purchaser. Warning ICP DAS assumes no liability for damages resulting from the use of this product. ICP DAS reserves the right to change this manual at any time without notification.
- Page 2 Wire Connections Modbus Table (M-7018Z only) Address Description Address Description 30001 ~ Analog input value of channel 0 to 9 40488 Modbus response delay time in ms, 30010 valid range: 0 ~ 30 40001 ~ 40489 Host watchdog timeout value, 0 ~ 40010 255, in 0.1s 30129...
- Page 3 Module test and configuration Step 1: INIT switch Operation Step 2: Install & Run DCON Utility 1. Please Install DCON Utility first You can find the software in the CD. CD path: <Driver>:\napdos\driver\dcon_utility\ Web link: http://ftp.icpdas.com/pub/cd/8000cd/napdos/driver/dcon_utility/ 2. Run DCON utility 1.
- Page 4 Step 5: Configuration Settings & Channel Settings Module Settings Protocol DCON / Modbus Address 1~255 (0:INIT) Baud rate 1200~115200 Parity option N,8,1 Channel Status Input Range Settings CJC offset Temperature Offset Settings Step 6: Change to normal mode and keep the settings 1.