Table of Contents
Advertisement
(6) Press the PLAY button to perform the deleting. When the deletion
is completed, the display will show the location of the next note.
RHYTHM
EDIT
c
u
RHY:Close
HH
ST.16
V:052
Note: You cannot delete the data located at the beginning of the
song.
2-2 Inserting Data
(7) Use the Dial to select a data which is located near the data you
want to insert.
(8) Press the FF button. The display shows "INSR" (short for
INSERT).
(9) Use the CURSOR buttons to move the cursor to a field and
change the parameter on the field using the Dial.
RHY:Close
HH
ST200
V:064
35
(a) ST (Step Time) field: If you want to change the beat number of
the display, turn the Dial on and use with the cursor in the ST field.
(When the Time Signature is 6/8, clockwise rotation of the Dial over
the ST:23 adds one value to the beat number, for example.)
7
RHYTHM
DIT
TT
e
ENGR
ce 4
ee
mA
(b) RHY field: If you change the value of the RHY field on and on,
the VOLUME or BEND data will replace the instrument name. You
can insert the Volume or Pitch Bend message by selecting the
appropriate one. The Volume level ranges from 0 to 126. The Bend
value ranges from —70 to 70. Lowering the pitch to the maximum
amount is equal to a Bender value of —70. Raising the pitch all the
way is a value of 70.
Note: Press the STOP button now if you want to cancel the inserting
operation.
(10) Press the PLAY button to insert the data. The insertion is carried
out and the display stops indicating "INSR".
NOTES:
Advertisement
Table of Contents
