Table of Contents
Advertisement
2 Step Time Edit
Step Edit allows you to insert, delete and replace note by note.
(1) Repeat the steps 1 to 3 of the basic procedure. (See page 33)
(2) Press the right CURSOR button several times until the display
showS "STEP EDIT". Now you are in STEP EDIT mode.
EDIT
STEP
EDIT
-
(3) Press the RECORD button. The RECORD button lamp lights and the
display shows information on the beginning data of the rhythm part.
VOL: *kk
S$:L31
$T:00
Note: You cannot delete this data.
VOL(short for Volume) field shows the Volume level of the notes
located after this data.
S:L (short for Slope Level) field shows how fast the volume level of
the notes located after this data change. The value range is from 0
to 31.
ST (short for Step Time) field shows you where you're at within
each beat. When the Time Signature is 6/8, the rhythmic beat divi-
sions are represented as a fraction of 24. When the Time Signature
is other than 6/8, the rhythmic beat divisions are represented as a
fraction of 48. 24 equals to 8th note, for example.
34
2-1 Deleting Data
(4) Use the Dial to select the data to delete. As you rotate the Dial,
data names appear on the display. Showing the beat and measure
number of the data. Note events sound briefly in passing to help
you audibly monitor your position.
RHYTHM
EDIT
c¢ J
{ft
MEASURE
BEAT
Note: If many sounds are on the same location, only one of the
sound names is displayed when searching forward (turning the Dial
clockwise, or to the right).
Turn the Dial counter-clockwise to break up the sounds so that you
can display the sounds individually.
RHY (short for rhythm) field indicates instrument name.
V (short for Velocity) field indicates the Velocity value which con-
trols the volume level of the sound.
RHY = RHYTHM FIELD/INSTRUMENT NAME
[ee
RHY:Close
HH
ST216
V:052
STEP TIME
VELOCITY
The above displays indicate that the CLOSED HH in the Step Time
16, Beat Number 3, Measure Number 2 whose Velocity value is 52.
aoe
Oe
oe
HELE @ 3
——/
(5) Press the REW button. The display shows "DELE" (short for
DELETE). Note: Press the STOP button now if you want to cancel
the deleting operation.
Advertisement
Table of Contents
