Kawai XR9000 Owner's Manual page 37

Digital electronic organ
Hide thumbs Also See for XR9000:
Table of Contents

Advertisement

14-7 RECORDING
Note:
* Turn the disk write protect off (close the window) during recording.
(1) Insert the supplied disk or a formatted disk for your organ.
Then, select the song number to be recorded using the FF and REW
buttons.
(2) Press the RECORD button. The lamps of tracks that have not
been recorded start flashing. The track button lamp on which the
selected song is recorded lights.
(3) Select the track to be recorded.
Tracks that have not yet been recorded: Pressing the track button
changes the lamp from flashing to off.
Tracks that have been recorded on: Pressing the track button
OISK PLAYER SYSTEM
CEJ
TRACK
Co
'TACK SELECT
changes the lamp from lit to flashing to off to lit and the cycle
repeats.
Set the track to be recorded so that its lamp starts flashing, TO
RECORD - LAMPS MUST BE FLASHING.
Notes:
¢ Tracks whose lamps are lit or off cannot be recorded on. The lamp
must be flashing.
° If a re-recording is carried out on a recorded track, the previous
recording will be lost.
e Press the STOP button if you want to cancel recording.
(4) Press the PLAY button and the button lamp lights.
Note: When the SYSTEM button is lit: the previously recorded set-
tings (tone selection, tempo, etc.) are recalled before the recording
starts.
When the SYSTEM button is not lit: the song is replayed under the
current settings.
L')
SEQ
Record
Regist
Save
SEQ
Record
A. P.O
Save
SEQ
Record
Save
END
SNGO
1 : 2k RRR
27
When the SYSTEM button is flashing, the song can be replayed after
the contents of the program rhythm and registration data is trans-
————
-2 4
eee
ferred from the disk.
While setting data is transferred from the disk, the display will show
"Regist Save" and "A.P.0. Save".
The first two measures of the introduction are counted down, and
replaying begins.
3
Begin the performance.
Display will show the numbers of measure
and beat and you will hear the metronome sound if the rhythm is
not on.
(5) Press the STOP button when the performance is completed.
Recording is stopped and the lamps in the RECORD and PLAY but-
tons turn off.
NOTES:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xr7000

Table of Contents