Table of Contents
Advertisement
8. Program Card
The SR Series has adopted the IC card as the medium for storing programmable rhythm, program sequencer, and program
registration data. This exciting new storage medium allows you to expand your library of sounds far beyond the immediate
capacity of the organ yet still have rapid access to this data.
You may order additional IC cards from your Kawai dealer.
CARD
8.1 Inserting the Card
®@ Procedure
{1) Gently insert the card into the slot with the arrow
label facing upward.
As
(2) Always remove the card from the organ after use.
Pull it out straight without bending or twisting it.
is
(3) Always use genuine Kawai cards. Other cards
may present compatibility problems.
@ TAKE CARE OF YOUR DATA CARDS!
*When not using a card, keep it in its protective case
and store away from dust, heat, moisture, and direct
sunlight.
* Never touch the card contacts. They may corrode and
produce errors.
* Never use force to insert or remove the card from the
organ. Such force can damage both the card and the
connectors inside the organ.
*Wipe only with a clean cloth. Never
use waiter,
detergent,
alcohol,
or any
other
liquid cleaning
agents.
46
CoC oe
PROGRAM CARD
8.2 Saving to the Card
The card has room for the foflowing data:
® PROGRAM
I, PROGRAM
IE, VARIATION
I, VARIA-
TION H, VARIATION III, FILL IN, INTRO, and ENDING
data from the programmable rhythm section
Programmed registrations 1-7 {1-5 on the SR5), hand
percussion key assignments, and all panel settings
except the drawbars
Program sequencer chords and registrations
® Procedure
{1) Gently insert the card into the slot.
(2) Press the SAVE switch. If the card is properly
inserted, the LED in the switch lights and the word
"CARD" appears on the multifunction display. If
the card contains data, the lower right hand corner
of the display gives the block name.
If the organ detects something wrong with the
card contents, the word "ERR" appears for a few
seconds.
F ssi
ca
REG = Registrations
SEQ = Program Sequencer
RHY = Programmable rhythm
ALL = All the above
Advertisement
Table of Contents
