Kawai XR9000 Owner's Manual page 55

6-4 Changing the Pattern Length (MAIN Pattern only)
Note: You can change only the length of the pattern of the MAIN
pattern. The PATTERN LENGTH of the FILL IN, ENDING, and INTRO
patterns will be determined by that of the RHYTHM pattern.
(1) Repeat the steps 1 — 2 of the basic procedure. (See page 37)
a ey
0
EDIT ACCOMP
EDIT <>
PATTERN LENGTH
(2) Press the right CURSOR button several times until the display
shows "PATTERN LENGTH".
(3) Use the Dial to change the parameter value of the Pattern Length
shown at the right side of the display.
(GPa Pied eg ee ee ge he ee
Gg
EDIT ACCOMP
A rn ee
You can select a value of 1, 2, 4, 8 or 16.
(4) Perform the WRITE operation to store the change you made.
(See the Writing section for details.) If you want to cancel the edit,
press the ACCOMP or BASS button in the EDIT section before per-
forming the WRITE operation.
45
6-5 Copying a Pattern
(1) Repeat the steps 1 — 4 of the basic procedure. (See pages 39, 40)
(2) Press the right CURSOR button four times until the display will
show "COPY from MJ".
EDIT
COPY from MJ
(3) Turn the Dial to select MJ (major) or mn (minor).
<>
COPY from mn
(4) Press a rhythm button in the AUTO PLAY ORCHESTRA section.
The rhythm you selected will be copied and "COPY Ok" will be dis-
played.
EDIT
COPY OK!
(5) Perform the WRITE operation to store the RHYTHM pattern you
copied. (See the Writing section for details.) lf you want to cancel
the edit, press the ACCOMP or BASS button in the EDIT section
before performing the WRITE operation.
Notes:
¢ Only the pattern you selected will be copied.
* Using the FILL IN buttons, you can copy either FILL IN | or II patterns.
6-6 CUT BACK
The chord root key for the ACCOMP MELODY I, Il, and BASS parts
changes the pitch of the chord by one octave.
(1) Repeat the steps 1 — 4 of the basic procedure to select
either the ACCOMP MELODY |, II, or BASS part. (See pages 39, 40)
(2) Press the right CURSOR switch several times until the display
shows "CUTBACK".
EDIT ek
CUTBACK ROOT:G
(3) Use the Dial to select any one of C - B, or C+. If you select "E",
the E key will be the lowest chord root. If you select "C+", the C key
one octave higher than the C key will be the lowest chord root.
EDIT ****
CUTBACK ROOT:E
(4) Perform the WRITE operation to store the edit you made.
(See the Writing section for details.) If you want to cancel the edit,
press the ACCOMP or BASS button in the EDIT section before per-
forming the EDIT operation.