Table of Contents
Advertisement
6 FOOT SWITCH ASSIGN Function
This function allows you to assign a function to the foot switches.
(1) Press the CONTROL button. The CONTROL button lamp lights
and Display 2 shows F.S-L (short for Foot Switch Left) at the left
side. lf you want to assign a function to the right foot switch, press
the right CURSOR button and Display 2 shows "F.S-R" (short for
Foot Switch Right).
(2) Use Dial to change the parameter of Display 2.
CONTROL
F. S-L: STOP
You can assign any one of the following function to the foot switch.
CONTROL
F, S-R: FILL&END
ASSIGNABLE FUNCTIONS
1.STOP: stops the rhythm and auto accompaniment.
2. REG. BANK: Same function as the REGISTRATION BANK piston.
3. REG. UP: Moves the number of the registration by a value of
one. (1, 2,3,...6, 7, Panel, 1, 2,...)
4. PERCUSSION: Percussion sound can be assigned to the
footswitch. See the following page on to assign any one of
128 drum sounds.
5. SYNTH. PLUS: Synthesizer sound of the UPPER Keyboard will
be activated as long as the footswitch is held.
6. GLIDE: Pitch of a PRESET INSTRUMENT on the UPPER
KEYBOARD will drop by half-step as long as the footswitch is
held down.
. FILL&END: Add fill-in or ending pattern to the rhythm or auto
accompaniment.
(3) Press the CONTROL button to leave the FOOT SWITCH ASSIGN
Function.
61
7 TOUCH BAR ASSIGN Function
This function allows you to assign a function to the TOUCH BARS in
the same way as the FOOT SWITCH ASSIGN Function.
(1) Press the CONTROL button. The CONTROL button lamp lights.
(2) Select the "BAR-L" (short for BAR Left) or
CONTROL
BAR-L: PERCUSSION
"BAR-R" (short for BAR Right) menu using the CURSOR button.
CONTROL
BAR-R: PERCUSSION
Then, follow the same procedure for the FOOT SWITCH assign
mentioned above. (3) Press the CONTROL button to leave the
TOUCH BAR ASSIGN Function.
Advertisement
Table of Contents
