Maintenance / Servicing - UYAR VisionLine RWC 2.0 Operating Instructions Manual

Operating instructions VisionLine 2.0 camera systems
4.3

Maintenance / Servicing

Of particular importance is the regular check for contamination and if necessary the prompt and thoro-
ugh cleaning. Only with regular care and cleaning the trouble-free and permanent operation of UYAR
camera systems is possible.
With our special glass panes, which are installed in all models of the VisionLine RWC, you have acqui-
red a low-maintenance and robust product that makes it easy to clean or even change the special glass
pane.
Different concentrations of cooling lubricants, aluminum processing and changing minimum lubricati-
on, may have a negative impact on the visibility of the disc due to coating.
daily
weekly
monthly
if required
NOTICE
For a permanently good view on the process and optimal production conditions, we re-
commend holding an interchangeable glas pane and inserting and cleaning it alternately.
The special glass pane is a wearing part. A contamination and damage by chips on the
glas pane does not constitute a reason for complaint.
Checking the pane for damage
Cleaning the pane of glass
Check the hose system for leaks
Check operating pressure at pressure gauge
Checking the camera mount for loosened screw connections
Checking the monitor holder for loosened screw connections
Checking the filter elements of the air service unit
Replacing the filter elements of the air service unit
21
21