Operating instructions VisionLine 2.0 camera systems
3
Installation
The installation of our camera systems is generally uncomplicated, but must be done exactly according
to the installation instructions listed in the following chapters.
The installation of the camera and the electrical installation is only permitted by qualified personnel.
These installation instructions include the standard installation for industrial processing machines. Ho-
wever, depending on the type of construction or the type of system another mounting style can be
more appropriate. If you have any questions, please contact us directly:
UYAR GmbH & Co. KG
Carl-Bosch-Straße 6
33790 Halle (Westf.)
Germany
Phone: +49 (0) 5201 - 97 180 - 0
3.1
Before Installation
WARNING
The system to be equipped must be switched off by qualified personnel and secured
against being switched on again. Infringement may result in injury.
CAUTION
When working in the workspace, there is a risk of injury from edges. Wear suitable pro-
tective equipment!
First determine a suitable position for the camera system taking into account the following points:
The camera must be located outside possible collision areas,
■
The process to be observed must be optimally visible,
■
The coolant jet must not be directed at the camera system,
■
The position of the camera system should be determined in such a way that there is enough hose
■
left outside the machine to be able to position the flying connection in a meaningful and acces-
sible manner.
A suitable and user-friendly mounting position should also be found for the monitor.
For smaller screens up to 22" screen diagonal, the mounting above the HMI panel of the machine tool is
recommended. Depending on the application a different position may be more appropriate.
10
10
Need help?
Do you have a question about the VisionLine RWC 2.0 and is the answer not in the manual?