Table of Contents
Advertisement
Operating instructions VisionLine 2.0 camera systems
3.2
Mechanical installation
The following installation instructions are equally valid for the VisionLine RWC, EAC and EC
■
models. The respective installation instructions can be found in one of the following chapters,
depending on your camera:
3.2.2 Installation of the wall mount
■
For installation instructions on how to use the optional wall bushing, please refer to the chapter
3.2.3 Installation of the wall bushing „assembly seal"
■
3.2.1 Installation of the camera
1. Camera
2. External ball joint
3. Wall bushing „assembly seal"
4. Tight cable gland
5. Flying connection consisting of:
compressed air adapter Ø6mm
■
M12, 5-pin connector, A-coded
■
HDMI adapter (HDMI repeater)
■
11
11
Advertisement
Table of Contents
Need help?
Do you have a question about the VisionLine RWC 2.0 and is the answer not in the manual?