Daikin BRC1E73 Service Manual page 24

Main Menu List
Configuration
Current Settings
Clock & Calendar Date & time
Daylight Saving Time
Language
Note: Available setting items vary with the indoor unit model.
Sub Remote Controller Menu Items
If two remote controllers are connected to a single indoor unit,
the following menu items are not set in the sub remote
controller. In this case, the following items should be configured
in the main remote controller.
15
Menu item
Draft Prevention
(Only available with
occupant sensor
installed indoor unit
models)
Contrast
Adjustment
Display
12H/24H Clock
Individual Airflow Direction
Schedule
Off timer
Description
Draft prevention function can be enabled or disabled.
When enabled, the occupant sensor will adjust the louver's
position to prevent air blowing directly on an occupant.
Used to make LCD contrast adjustment.
Used to set the display mode.
Standard, Detailed, or Simple display
Detailed and Simple displays provide the selectable display
item among Room Temp, System, None or Outside Air
Temp.
Used to display a list of current settings for available items.
Used to configure date and time settings and corrections.
The default time display is 12H.
The clock will maintain accuracy to within ±30 seconds per
month.
If there is a power failure for a period not exceeding 48
hours, the clock will continue working with the built-in
backup power supply.
The time can be displayed in either a 12 hour or a 24 hour
format.
Used to adjust the clock in observance of Daylight Saving
Time.
The display language can be selected from English,
Français, or Español.
Setback
Draft Prevention
Outdoor unit
SiUS721424EB
Indoor unit
Two remote
controllers in control
Main Menu