Daikin BRC1E73 Service Manual page 15

SiUS721424EB
5. Scroll down
6. Scroll right
7. Scroll left
8. Select On/Off
9. Operation lamp
10.Cancel
11.LCD (with backlight)
Remote Controller
Used to decrease the setpoint.
The item below the current selection will be highlighted.
(The highlighted items will be scrolled continuously when the button is pressed continuously.)
Used to change the selected item.
Used to highlight the next item on the right-hand side.
Items are scrolled through in the right-hand direction.
Used to highlight the next item on the left-hand side.
Items are scrolled through in the left-hand direction.
Press to start the unit(s).
Press this button again to stop the system.
This lamp is lit solid green during normal operation.
This lamp blinks if an error occurs.
Used to return to the previous screen.
The backlight will be illuminated for approximately 30 seconds by pressing any button.
If two remote controllers are used to control a single indoor unit, whichever controller is
accessed first will have backlight functionality at that time.
Maintaining the Unit and LCD Display
Wipe the LCD and surface of the remote controller with a dry cloth when they become dirty.
If the dirt on the surface cannot be removed, soak the cloth in neutral detergent diluted with
water, squeeze the cloth tightly, and clean the surface. Wipe the surface with a dry cloth.
Note
Do not use any paint thinner, organic solvent, or strong acid.
Button Locations and Descriptions
6