Main Menu List - Daikin BRC1E73 Service Manual

Navigation remote controller
Hide thumbs Also See for BRC1E73:
Table of Contents

Advertisement

SiUS721424EB

1. Main Menu List

Use the following steps to access the Main Menu from the basic screen.
Pressing the "Cancel" button while the Main Menu screen is displayed takes you back to the basic
screen.
Airflow Direction
(This function is not available on all
indoor unit models.)
Individual
Airflow Direction
(depends on indoor
unit model)
Ventilation
Schedule
Off Timer
Celsius / Fahrenheit
Filter Auto Clean
Maintenance Information
Main Menu
Basic screen is
displayed.
Basic screen

Main menu list

Menu item
Louver Setting
Louver Setting
List
Reset All Louvers
Position
Ventilation Mode
Ventilation
operation settings
Ventilation Rate
for Energy
Recovery Ventilator
Daily Patterns
Settings
Press "Menu/OK" button.
Press "Cancel" button.
Description
Used to configure airflow direction settings.
The airflow direction louver is automatically operated up
and down (left and right).
The fixed airflow directions are configurable for five
positions.
Set the airflow direction individually for each of the 4 louvers.
Maximum 16 units (unit 0 to 15).
Setting table for louver.
Reset all louvers to factory default setting.
Used to set "Auto", "ERV", or "Bypass".
Used to set "Low" or "High".
Day settings are selected from four patterns, i.e., "7Days",
"Weekday/Sat/Sun", "Weekday/Weekend", and "Everyday".
Set the startup time and operation stop time.
ON: Startup time, cooling and heating temperature
setpoints can be configured.
OFF: Operation stop time, cooling and heating setback
temperature setpoints can be configured.
( --: Indicates that the setback function is disabled for
this time period. )
_:
Indicates that the temperature setpoint and setback
temperature setpoint for this time period is not
specified. The last active setpoint will be utilized.
Up to five actions can be set for each day.
Used to set the run-time for the indoor unit using this
controller.
Possible to set in 10 minutes increments from 30 to 180
minutes.
Used to select whether temperature values will be displayed
in Celsius or Fahrenheit.
Set the time when the filter needs to be automatically cleaned.
For the detailed operation refer to the Operation Manual of the
self cleaning decoration panel.
Used to display maintenance information.
Main Menu List
Main Menu is
displayed.
Main Menu
Airflow Direction
Individual Airflow Direction
Ventilation
Schedule
Off Timer
Celsius / Fahrenheit
Setting
Main Menu screen
1/3
14

Advertisement

Table of Contents
loading

Table of Contents