Daikin BRC1E73 Service Manual page 17

SiUS721424EB
Simple display
Note for all display modes
1. Operation mode
2. Fan Speed
3. Setpoints
4. Standby for Defrost/Hot start "
If ventilation icon is displayed in this field:
5. Message
The following messages may be displayed.
"This function is not available"
"Error: Push Menu button"
"Warning: Push Menu button"
"Time to clean filter"
"Time to clean element"
"Time to clean filter & element"
Remote Controller
1. Operation mode
3. Setpoints
2. Fan speed
Depending on the field settings, while the indoor unit is stopped, OFF may be displayed instead
of the operation mode and/or the setpoint may not be displayed.
Used to display the current operation mode: Cool, Heat, Vent, Fan, Dry or Auto.
In Auto mode, the actual operation mode (Cool or Heat) will be also displayed.
Operation mode cannot be changed when OFF is displayed.
Operation mode can be changed after starting operation.
Used to display the fan speed that is set for the indoor unit.
The fan speed will not be displayed if the connected model does not have fan speed control
functionality.
Used to display the setpoint for the indoor unit.
Use the Celsius/Fahrenheit item in the main menu to select the temperature unit (Celsius or
Fahrenheit).
Indicates that an Energy Recovery Ventilator (ERV) is connected.
For details, refer to the Operation Manual of the ERV.
Displayed for a few seconds when an Operation button is pressed and the indoor unit does not
provide the corresponding function.
In a remote control group, the message will not appear if at least one of the indoor units
provides the corresponding function.
Displayed if an error or warning is detected.
Displayed as a reminder when it is time to clean the filter and/or element.
Names and Functions of the Liquid Crystal Display
<Simple display example>
"
STANDBY
14. Selectable Display item
11. Setback
4. Standby for Defrost/Hot start
8