Table of Contents
Advertisement
10.5.10 Commissioning
10.5.11 User profile
EPRA14~18D + ETVH16SU18+23E
Daikin Altherma 3 H HT F
4P644738-1D – 2023.10
Mixing valve turning time
If a third party mixing valve is installed in combination with controller EKMIKPOA,
the valve turning time must be set accordingly.
For this setting, space heating/cooling and tank operation MUST be off:
[C.2] Space
heating/cooling=0 (Off) and [C.3] Tank=0 (Off). See
4
"10.5.12 Operation" [
226].
#
Code
[9.P.5]
[7-0C]
In case a bizone kit is installed, antiblockage of kit pump(s) and kit mixing valve
#
[9.I]
[3-0D]
NOTICE
The unit reboots as soon as a bizone kit is connected. After reboot of the unit we
recommend to set [3-0D]=1.
Overview
The following items are listed in the submenu:
A
Information
Installer settings
Commissioning
User profile
Operation
About commissioning
See: "11 Commissioning" [
[B] User profile: See
B
Installer settings
Commissioning
User profile
Operation
Malfunctioning
Mixing valve turning time: Time in
seconds for the mixing valve to turn from one
side to the other.
▪
20~300 sec (default: 125)
Code
In case a bizone kit is installed, antiblockage of
kit pump(s) and kit mixing valve
▪
0: disabled
▪
1: enabled
[A] Commissioning
[A.1] Operation test run
[A.2] Actuator test run
[A.3] Air purge
[A.4] UFH screed dryout
4
232]
"To change the user permission
[B] User profile
10
Configuration
|
Description
Description
4
level" [
139].
Installer reference guide
225
Advertisement
Table of Contents
