Table of Contents
Advertisement
3. Identify the Right Upright (112), which is marked
with a "Right" sticker. Have a second person
hold the Right Upright near the Base (85) as
shown.
See the inset drawing. Tie the wire tie in the
Right Upright (112) securely around the end of
the Upright Wire (79). Then, pull the other end
of the wire tie until the Upright Wire is routed
completely through the Right Upright.
4. Have a second person hold the Right Upright
(112) against the Base (85), with the Right
Upright positioned as shown. Be careful not to
pinch the Upright Wire (79).
Attach the Right Upright (112) to the Base (85)
with two 3/8" x 2 1/2" Bolts (10) and two 3/8"
Star Washers (9). Note: If the Bolt (A) hits the
#8 x 3/4" Screw (1) attaching the Base Cap
(86), loosen the Screw several turns.
Firmly tighten the 3/8" x 2 1/2" Bolts (10). If nec-
essary, retighten the #8 x 3/4" Screw (1).
All manuals and user guides at all-guides.com
8
3
79
Wire
Tie
4
112
79
85
79
112
Wire Tie
112
79 86
1
9
A
10
85
Advertisement
Table of Contents
