Adjusting The Radio Volume; Radio Settings; Inreach Remote; Connecting An Inreach Device - Garmin TREAD Owner's Manual

Adjusting the Radio Volume

1
Select Radio > .
2
Use the slider bars to adjust the volume.

Radio Settings

From the main menu, select Radio >
Push to Talk Over Headset: enables you to transmit your voice
using the push-to-talk button on your compatible headset.
Roger Tone: sets the roger tone the device plays when you
operate your radio.
Reset Default Settings: resets all radio settings and presets to
factory default values.
inReach Remote
®
The inReach remote function allows you to control your inReach
satellite communication device (sold separately) using your
Tread device. You can send messages, view weather reports,
trigger an SOS alert and more. Go to
purchase an inReach device.

Connecting an inReach Device

1 Bring the inReach device within 3 m (10 ft.) of your Tread
device.
2
On your Tread device, select
3
Follow the on-screen instructions on your Tread device to
complete the pairing process.
After the pairing process is complete, the inReach and Tread
devices connect automatically when they are within range.

Sending an inReach Message

Before you can send an inReach message using your Tread
device, you must pair it with a compatible inReach device
(Connecting an inReach Device, page
You can use your device to send inReach messages to your
contacts.
1
Select > inReach >
2
Select New Message.
3
Select Select Contacts to add one or more contacts.
4
Enter a message.
5
Select Send.

SOS

During an emergency, you can contact the GEOS International
Emergency Rescue Coordination Center (IERCC) to request
help. Pressing the SOS button sends a message to the rescue
coordination centre, and they notify the appropriate emergency
responders of your situation. You can communicate with the
rescue coordination centre during your emergency while you
wait for help to arrive. You should only use the SOS function in a
real emergency situation.
Initiating an SOS Rescue
Before you can initiate an SOS rescue using your Tread device,
you must pair it with a compatible inReach device
an inReach Device, page 7).
NOTE: while in SOS mode, the inReach device cannot be
turned off.
1
Select > inReach.
2
Select .
3
Wait for the SOS countdown.
The device sends a default message to the emergency
response service with details about your location.
4
Reply to the confirmation message from the emergency
response service.
Your reply lets the emergency response service know that
you are capable of interacting with them during the rescue.

Using the Map

.
buy.garmin.com to
> inReach.
7).
.
(Connecting
For the first 10 minutes of your rescue, an updated location is
sent to the emergency response service every minute. To
conserve battery power after the first 10 minutes, an updated
location is sent every 10 minutes when moving and every 30
minutes when stationary.
Cancelling an SOS Rescue
If you no longer need assistance, you can cancel an SOS
rescue after it is sent to the emergency response service.
Select Cancel SOS > Cancel SOS.
Your device transmits the cancellation request. When you
receive a confirmation message from the emergency response
service, the device returns to normal operation.
Using the Map
You can use the map to navigate a route
map, page 15) or to view a map of your surroundings when no
route is active.
1
Select View Map.
2 Select anywhere on the map.
3
Select an option:
• Drag the map to pan left, right, up, or down.
• To add or remove map layers such as topographic and
BirdsEye imagery, select
• To zoom in or out, select
• To switch between North Up, 2-D and 3-D views, select .
• To start a route, select a location on the map, and select
Go! (Starting a route by using the map, page

Map Tools

Map tools provide quick access to information and device
functions while you view the map. When you activate a map
tool, it appears in a panel at the edge of the map.
Stop: stops navigation of the active route.
Edit Route: allows you to re-route or skip locations in your route
(Changing Your Active Route, page
Mute: mutes the device audio.
Towns Ahead: shows upcoming towns and services along your
active route or along a highway
Up Ahead: shows upcoming locations along the route or the
road on which you are travelling
Elevation: displays elevation changes ahead.
Traffic: displays traffic conditions along your route or in your
area (Viewing upcoming traffic, page
available in all areas or for all device models.
Trip Data: displays customisable trip data, such as speed or
mileage (Viewing trip data from the map, page
Track Recorder: displays the track data for your active route.
Turns: displays a list of upcoming turns in your route
turns and directions, page
Phone: displays a list of recent phone calls from your connected
phone, and displays in-call options while a phone call is
active (Using in-call options, page
Weather: displays weather conditions for your area.
Report Camera: allows you to report a speed or red light
camera. This tool is available only when you have speed or
red light camera data on your device and you have an active
connection to the Tread app
Headset, page 13).
Music Player: displays media controls and media information.
Pitch and Roll: displays the current angle of your vehicle
and Roll, page 5).
(Your route on the
.
or .
15).
15).
(Towns Ahead, page
(Up ahead, page 8).
8). This feature is not
8).
(Viewing
15).
14).
(Pairing Your Phone and
8).
(Pitch
7