Page 1
10 Gallon Battery Powered Portable Spray Unit Operation Manual SP-BP-10N READ ALL INSTRUCTIONS BEFORE USING OR SERVICING THIS UNIT. KEEP THIS MANUAL IN A LOCATION THAT IS READILY AVAILABLE TO USERS AND SERVICE TECHNICIANS. Scan this code for English (Original Instructions)
Page 2
When not in use, store unit indoors in a cool, dry location. Keep unit away from unauthorized users. To prevent premature battery failure, do not store battery in a depleted state for long periods of time. Model: SP-BP-10N V20231110 • Page 2 of 8...
Protect the Environment Please dispose of packaging materials, old machine components, and hazardous fluids in an environmentally safe way according to local waste disposal regulations Model: SP-BP-10N V20231110 • Page 3 of 8...
Flow rate* 0.8-0.9 gal/min (3-3.4 l/min) Pump seals Santoprene diaphragm, Viton check seals Wheel type Two 10 inch (25.4 cm) non-marking wheels. *Flow rates given are based on chemical with viscosity of water. Model: SP-BP-10N V20231110 • Page 4 of 8...
Product Components Get to know the SP-BP-10N components that you will need to use, adjust or assemble. Back plate assembly • Inside view 1. In-line strainer 2. Electric fluid pump 3. Relay controller 4. Pressure switch 5. Back plate thumb nuts 6.
Page 6
Back view 7. Hinged lid 8. Solution tank 9. Drain plug 10. Discharge wand 11. Poly spray gun 12. Discharge hose 13. Power button 14. Battery 15. Battery box 16. Suction line valve Model: SP-BP-10N V20231110 • Page 6 of 8...
Activate unit until all solution has been flushed from the system. 9. Press power button to turn off unit. Squeeze trigger handle to relieve remaining pressure. 10. Before using unit with another chemistry, thoroughly flush with water. Model: SP-BP-10N V20231110 • Page 7 of 8...
To service your unit, refer to the service manual which includes: • Troubleshooting procedures. • Detailed parts breakdowns and illustrations. • Part numbers of serviceable components and assemblies. Scan this code for service manual Model: SP-BP-10N V20231110 • Page 8 of 8...
Page 9
10 Gallon Battery Powered Portable Spray Unit Service Manual SP-BP-10N READ ALL INSTRUCTIONS BEFORE USING OR SERVICING THIS UNIT. KEEP THIS MANUAL IN A LOCATION THAT IS READILY AVAILABLE TO USERS AND SERVICE TECHNICIANS. Scan this code for English (Original Instructions)
Page 10
When not in use, store unit indoors in a cool, dry location. Keep unit away from unauthorized users. To prevent premature battery failure, do not store battery in a depleted state for long periods of time. Model: SP-BP-10N V20231025 • Page 2 of 13...
Page 11
Protect the Environment Please dispose of packaging materials, old machine components, and hazardous fluids in an environmentally safe way according to local waste disposal regulations Model: SP-BP-10N V20231025 • Page 3 of 13...
Page 12
• Crescent wrench (2x) • #2 Phillips head screwdriver • 1/ 4 in. (7 mm) hex bit • #3 Phillips head screwdriver • Flat head screwdriver • Hose cutters • Thread seal tape • Knife Model: SP-BP-10N V20231025 • Page 4 of 13...
Page 13
• A faulty pump or compressor may need to be replaced. Battery/charger fault light is • Refer to the separate manuals supplied with the battery and charger for more flashing information regarding indicator and fault lights. Model: SP-BP-10N V20231025 • Page 5 of 13...
7 in. lid flange - polyethylene - 4 LD-7BK-FLNG black* * Additional colors available, see datasheet for options. Item number Description 5 TNK-10N 10 gallon natural tank Drain plug assembly for portable 6 DPA units - includes gasket Model: SP-BP-10N V20231025 • Page 6 of 13...
Page 15
Phillips - Vibra-Seal 10 W10 Wheel - non-marking - 10 in. VLVA-PVCV34 Flat washer for ⅝ in. pipe - stainless - 11 FW58 0.687 id x 1.5 od x 0.07 thk WHLA-AXL14 Model: SP-BP-10N V20231025 • Page 7 of 13...
Viton seals, Santo diaphragm In-line strainer - ⅜ barb - EPDM 9 STR38-IL gasket - 20 mesh SS - black bowl ⅜ in. blue hose - hybrid TPE - 10 H38BL-F available per ft. Model: SP-BP-10N V20231025 • Page 8 of 13...
Page 17
Lithium ion battery - 24V 4Ah Lithium ion battery charger - 8 BLI-24V-CHRGR 24V - includes NA power cord NOTE: Refer to battery and charger user manuals for more information. *not included with backplate assembly Model: SP-BP-10N V20231025 • Page 9 of 13...
Page 18
Pressure switch - 1/ 4 quick fit - 2 PS14QFV-55 55 PSI - Viton membrane Quick fit - 1/ 4 MPT x 1/ 4 od tube - 3 QF14P polypropylene PSHA-BP Model: SP-BP-10N V20231025 • Page 10 of 13...
2 SSC38 Stainless screw band clamp for 3/8 in. hose 3/8 in. blue* hose - hybrid TPE - available 3 H38BL-F per ft. * Additional colors available, see datasheet for options. HA38BL-12 Model: SP-BP-10N V20231025 • Page 12 of 13...
- gray handle with red clip - 3 PSG12 316SS internal spring - includes 2x o-ring 4 HBSS1238 Stainless hose barb ½ MPT x 3/8 barb Stainless screw band clamp for 3/8 in. 5 SSC38 hose PSGA384-ST8020 Model: SP-BP-10N V20231025 • Page 13 of 13...