Foamit SP-50N Operation Manual

Foamit SP-50N Operation Manual

50 gallon spray unit
Hide thumbs Also See for SP-50N:

Advertisement

50 Gallon Spray Unit
Operation Manual
SP-50N
READ ALL INSTRUCTIONS BEFORE USING OR
SERVICING THIS UNIT. KEEP THIS MANUAL IN A
LOCATION THAT IS READILY AVAILABLE TO USERS
AND SERVICE TECHNICIANS.
Scan this code for
English (Original Instructions)
operation manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SP-50N and is the answer not in the manual?

Questions and answers

Summary of Contents for Foamit SP-50N

  • Page 1 50 Gallon Spray Unit Operation Manual SP-50N READ ALL INSTRUCTIONS BEFORE USING OR SERVICING THIS UNIT. KEEP THIS MANUAL IN A LOCATION THAT IS READILY AVAILABLE TO USERS AND SERVICE TECHNICIANS. Scan this code for English (Original Instructions) operation manual...
  • Page 2 Always flush the unit with fresh water thoroughly when switching from an alkaline to an acid or an acid to an alkaline. Model: SP-50N V20240813 • Page 2 of 8...
  • Page 3 If needed, install an air dryer before the unit. PROTECT THE ENVIRONMENT Please dispose of packaging materials, old machine components, and hazardous fluids in an environmentally safe way according to local waste disposal regulations Model: SP-50N V20240813 • Page 3 of 8...
  • Page 4: Product Overview

    Wheel type one with lock * Rates given are based on chemical with viscosity of water and factory air pressure settings. Rates will vary due to viscosity of product and spray tip size. Model: SP-50N V20240813 • Page 4 of 8...
  • Page 5: Product Components

    Product Components Get to know the SP-50N components that you will need to use, adjust or assemble. Back plate assembly • Inside view 1. In-line strainer 2. Quick-change pump 3. Air regulator 4. Air pressure gauge 5. Suction line valve Model: SP-50N V20240813 •...
  • Page 6 Back view 6. Hinged lid 7. Solution tank 8. Drain plug 9. Discharge wand 10. Trigger gun 11. Discharge hose 12. Back plate thumb nuts 13. Air fitting 14. Suction line valve Model: SP-50N V20240813 • Page 6 of 8...
  • Page 7: Using Your Unit

    8. After solution has been removed, disconnect air line from the air fitting. 9. Squeeze trigger handle to relieve all remaining pressure from the unit. 10. Before using unit with another chemistry, thoroughly flush with water. Model: SP-50N V20240813 • Page 7 of 8...
  • Page 8: Maintenance

    To service your unit, refer to the service manual which includes: • Troubleshooting procedures. • Detailed parts breakdowns and illustrations. • Part numbers of serviceable components and assemblies. Scan this code for service manual Model: SP-50N V20240813 • Page 8 of 8...

Table of Contents