Thermal module
Remove the left SSD
Make sure the following FRUs (or CRUs) have been removed.
"Remove the lower case" on page 29
Step 1.
Disconnect the battery pack cable from the system board. Remove one screw and then remove the
left SSD.
Attention: Use your fingernail to pull the connector to unplug it. Do not pull the cable.
Figure 12. Remove the left SSD
Screw specifications
M2 × L3
Notes: For LCD panel with the factory color calibration feature, do the following to install new color
profiles:
1. Go to
https://pcsupport.lenovo.com/us/en/downloads/DS543953
software. Double-click the EXE file and follow the on-screen instructions to finish the
installation.
2. X-RiteColorAssistant.exe will auto run. Click Restore Profile button from prompted window to
restore the profile from Lenovo cloud.
Go to
https://support.lenovo.com/partslookup
replacement part:
SSD
Remove the right SSD
Make sure the following FRUs (or CRUs) have been removed.
34
Lenovo Legion Slim 5 (16", 9)Hardware Maintenance Manual
Number of screws
1
to look up the Lenovo part numbers of the following
Torque
1.85 ± 0.15 kgf-cm
to download the installation