"Remove the lower case" on page 29
Step 1.
Disconnect the battery pack cable from the system board. Remove one screw and then remove the
right SSD.
Attention: Use your fingernail to pull the connector to unplug it. Do not pull the cable.
Figure 13. Remove the right SSD
Screw specifications
M2 × L3
Notes: For LCD panel with the factory color calibration feature, do the following to install new color
profiles:
1. Go to
https://pcsupport.lenovo.com/us/en/downloads/DS543953
software. Double-click the EXE file and follow the on-screen instructions to finish the
installation.
2. X-RiteColorAssistant.exe will auto run. Click Restore Profile button from prompted window to
restore the profile from Lenovo cloud.
Go to
https://support.lenovo.com/partslookup
replacement part:
SSD
Remove the touchpad bracket
Make sure the following FRUs (or CRUs) have been removed.
"Remove the lower case" on page 29
Step 1.
Disconnect the battery pack cable from the system board. Remove two screws in alphabetical
order and then remove the touchpad bracket.
Attention: Use your fingernail to pull the connector to unplug it. Do not pull the cable.
Number of screws
1
to look up the Lenovo part numbers of the following
Torque
1.85 ± 0.15 kgf-cm
to download the installation
.
Chapter 4
Removing a FRU or CRU
35