Table of Contents
Advertisement
4. Device Setup
This chapter describes the setup procedure for the IX90 in the following sections:
Safety
Instructions
Periodic
Inspection
•
Safety Instructions
•
Periodic Inspection
•
Environmental Factors
•
Inside the Shipping Carton
•
IX90 Setup
•
Installing Printer
•
Installing Cash Drawer
•
Connecting IX90 to a Power Source
•
Loading a Paper Roll in the Printer
•
Verifone Cloud POS Pairing
•
Alternative Payment Methods (APMs)
•
IX90 Transactions
1
Read all instructions before connecting the equipment. Do not attempt to
install this device until all the instructions and warnings have been read and
properly understood.
2
Make sure that there are no missing or defective parts - defective parts must
never be used. Verifone is not liable or responsible for damage or injury caused
by improper installation, improper use, or failure to observe these safety
instructions. In such cases warranty might get void.
3
Do not use any attachments not specifically recommended by Verifone as they
can result in the risk of fire, electric shock, or injury.
4
Do not use the device near water.
5
Do not place this unit on an unstable cart, stand, or table. The unit may fall,
causing serious personal injury and/or damage to the equipment.
1
It is recommended to periodically inspect the product and its fixing points to
ensure that safety is maintained.
2
Periodically inspect the device for possible tampering. Signs of tampering
include:
Installation Guide
IX90 M440
15
© VeriFone Inc. All rights Reserved.
Advertisement
Table of Contents
