Accessories - Graco TexSpray GM 1030 Instructions-Parts List Manual

ACCESSORIES
USE ONLY GENUlNE GFlACO PARTS AND ACCESSORIES
Must
be purchased separafeM
DISPLACEMENT PUMP REPAIR KIT 235-186
See contents on page 32. Repair instructions are in-
cluded with the kk.
AIR AND MATERIAL HOSE KIT 235-739
A i r : 300
psi (20.7 bar)
MAX.
WORKING PRESSURE
Fluid: 750 psi (51.7 bar)
MAX.
WORKING PRESSURE
50
ft.
(15.2
m)
hoses to supplement the
50
ft (15.2 m)
hose
k t
supplied with the sprayer. Use up to three
more hose
kits.
DO NOT use this kit at the sprayer
outlet
as
it does not have a spring guard on the mate-
rial hose.
GM3012 HIGH PRESSURE DISPLACEMENT PUMP,
3000psi
(210
bar)
MAXIMUM
WORKING PRESSURE
U p
to 1.2 GPM
Quickly convert your GM 1030 TexSpray to a system
that will spray prlmer, sealer, smooth eiastomerics as
well
as
architectural paints, acrylics, urethanes and
bonding adhesives. Maximum recommended tip size
is 0.035. Contact your distributor for help in determin-
tions included.
lng when to use this
kit.
Installation and repair instruc-
spray hose with spring guards on both ends. These
Requires airless spray gun and tip guard and airless
accessories must be rated for at least 3000 psi (210
bar) working pressure.
PRESSURE CONTROL, AND FILTER KIT 224-524
2 GPM DISPLACEMENT PUMP 235-965
1000
psi
(70 bar)
MAXIMUM
WORKING PRESSURE
This accessory
k t
directly replaces the standard
TexSpray 3 gpm pump. Use it when spraying smooth
and fine textures where lower volume is important for
better control. Operates In the 1/4 to 2 gpm range
(Not shown.)
3000 psi
(210 bar)
MAXIMUM
WORKING PRESSURE
HIGH PRESSURE SPRAY HOSES
214-705
3/8" ID, cpld
3/8 npt(m);
50
ft (15
m),
spring guards both ends
223-541 1/4" ID, cpld 1/4 npsm
(9;
50 ft (15 m),
spring guards both ends
214-701 1/4" ID, cpld 1/4 npsm
(9;
3 ft (0.9
m).
spring guards both ends
ADAPTERS
157-705 Union, 1/4 npt(m) x 3/8 npsm(9
150-287 Adapter, 1/4 npt(m)
x
3/8 npt(fj
156-173 Union, 3/8 nptQ
x3/8
npsm(t)
34
308-269